PVC Bottle Steam Shrink Tunnel
1. Brief Introduction
Steam shrink tunnel is used for shrinking sleeve labels to label kinds of bottles: different and irregular round bottles, square bottles, flat bottles and women-shaped bottles. By shrinking PVC or PET sleeve labels to seal bottles caps /necks, cover bottles body even shrink wrap bottle bottom.
To get smooth shrink effect, we usually adjust the heights and positions of the 3 sections of steam spray tubes insides of tunnel. Bottles run on the conveyor, the shrink usually goes from down to top of bottles.
PVC Bottle Steam Shrink Tunnel
2.Advantage of Howfond’s Steam shrink tunnel.
The blower motor’s holder is made of SS304 stainless steel.
The elbow which connects blower motor is made of SS304 stainless steel.
The frame is made of SS201 or SS304 stainless steel.
The steam spray tubes are made of SS304 stainless steel.
The steam transmission tubes are made of SS304 stainless steel.
PVC Bottle Steam Shrink Tunnel
3. Parameters
| Item Models | HF-1200M | HF-1500M | HF-2000M | HF-2300M |
| Length of tunnel | 1.2meters | 1.5meters | 2.0meters | 2.3meters |
| Blower powder | Ø12, 0.25KW | Ø12, 0.25KW | Ø12, 0.25KW | Ø12, 0.25KW |
| Powder supply of blower | 220V 3P 60Hz or 220V 1P 50Hz |
| Entrance /exit height | Max 350mm |
| Entrance /exit width | 130~210mm (fixed size once confirmed) |
| Running pressure | Max 0.6Mpa | Max 0.6Mpa | Max 0.6Mpa | Max 0.6Mpa |
| Weight | 180kg | 200Kg | 220kg | 230kg |
| Steam consumption | 18kg/h | 21kg/h | 24kg/h | 24kg/h |
| Conveyor speed | 0~35m/minute | 0~35m/minute | 0~35m/minute | 0~35m/minute |
| Outline size (m) | L1.2*W0.4*H1.5 | L1.5*W0.4*H1.5 | L2.0*W0.4*H1.5 | L2.3*W0.4*H1.5 |
PVC Bottle Steam Shrink Tunnel
Contact: Ms Alice Zhao
Email: howfond@126.com
Mobile: +86-156 9211 8327
WhatsApp/wechat: +86-156 9211 8327
Skype: alicehowfond
http://www.shrinktunnel.net
|
|
Steam Shrink Tunnel with Glass door for Sleeve Applicator Machinery Images
|
